Major technical parameters :
1.adjustable angle : ≤16°
2.working voltage : 9-15V
3.rotating torque : (0.5±0.25)Nm
4.manual adjusted torque : (1.05±0.35)Nm
5.idle travel : ≤0.4°
Major technical specification
1.vibration test : after vibration test at 33.3Hz frequency and 43.1m/s2 acceleration, no loose,demage or deformation,and it can work as normal.
2.impact test : after impact test at 98m/s2 acceleration, 11 ms pulse duration, 10000 impacts, no loose, demage or deformation, and it can work as normal.
3.high temperature : after high temperature test at 65°C for 12h, no visible crack or obvious deforma-
tion on the illuminated surface.
4.salt-fog test : after salt-fog test for 16h and recover 24h,no visible corrosion trace and it can work as normal.
5.low temperature : after low temperature test at -40°C for 2h, no visible crack or obvious deformation on the illuminated surface and external surface.
6.high voltage holding test : the insulation of the product can stand on 50Hz,550V for 1 minute without breakdown and it can work as normal.
7.cycling wet and hot test : the product should bear two cycle wet and hot test at ambient temperature 25°C-40°C,relative humidity not less 95%,no deformation or crack on the plastic part surface. |
Bookmark / Share this page